Confrontation Part IV: Plastic & Putty

Last time, I presented the heavily engineered mounting post that I crafted to support the metal knight & pegasus combination for this diorama. Any hope of suspending such a heavy, metal figure from a single point required a solid structure. This time, I will explore some of how I approached the dragon at the opposite end of the scene, as well as some of the initial rough terrain layout for the base.

First, and foremost, this base is going to use up a massive amount of Super Sculpey modeling clay. The material is easy to work with, cheaper than Green Stuff, and won't dry out, or set until I bake it. That means I have weeks to fiddle with it, and add detail before I run off to bake it. You can see the first few stone forms in the photo above, as well as the clear delineation between the little fired patch around the brass support post, and the fresh Sculpey.

Confrontation Part III: Engineering for Metal

It has been quite some time since I posted the last installment of this series. Even though I knew this would be a long one, I had not intended to go five months between updates! To provide a brief recap: I had assembled most of the parts of the dragon Narthrax, but the other participant in the scene was sadly lacking in readiness:

Since the, I have been trying to get the metal half of this duo assembled, so I could get back to blocking out and building the base that will support both of them.

Confrontation Part II: It's Not Easy Being Green

As expected, I have been proceeding slowly with this giant diorama WIP. In the past few weeks, I have been mostly painting tabletop miniatures for my Dropzone Commander armies (more on that in a later entry.) Still, I have done a lot of work preparing the dragon Narthrax for paint.

I need to get both the dragon and the knight mostly cleaned and assembled before I can begin construction of the scenic base to support them. I can't really complete their assembly or paint until I get that done. As is usually the case, prep work is key.